Pipeline Centrifugal Pump Water Horizontal Centrifugal Pump Single Stage Single Suction Centrifugal Vertical Inline Booster Pump
Horizontal inline pump:
· ISW horizontal inline pump is used for conveying clean water and other liquids with physicochemical properties similar to clean water. It is suitable for industrial and urban water supply, pressurized water supply of high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transmission, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching. The service temperature T ≤ 80 ºC.
· ISWR horizontal hot water inline pump is widely used in: metallurgy, chemical industry, textile, papermaking, and hotels and restaurants and other boiler hot water pressurized circulating transportation and urban heating systems, ISWR type operating temperature T≤120ºC.
· ISWH horizontal chemical inline pump is used to convey corrosive liquids without solid particles and with viscosity similar to water. It is suitable for petroleum, chemical industry, metallurgy, electric power, papermaking, food, pharmaceutical and synthetic fiber departments. The service temperature is - 20 ºC ~ + 120 ºC.
· ISWB horizontal inline oil pump, used for conveying gasoline, kerosene, diesel and other oil products or flammable and explosive liquids, and the temperature of the conveyed medium is -20ºC~+120ºC.
Performance Parameters:
| Flow range: |
2.5-2000m3/h |
| Head range: |
5-153.6m |
| Power: |
0.18-160kw |
| Material: |
Cast iron,SS304,SS316,SS201,etc |
Feature of product:
1. Compact structure. This series of pumps are of horizontal structure, with integrated machine and pump, beautiful appearance and less floor area. Compared with ordinary horizontal pumps, the floor area is reduced by 30%. If IP54 outdoor motor is adopted, it can be placed outdoors without pump room.
2. Smooth operation, low noise, high concentricity of components. The motor and pump are directly connected, which simplifies the intermediate structure and increases the smoothness of operation. The impeller has excellent dynamic and static balance, no vibration and low noise during operation, which prolongs the service life of the bearing and improves the use environment.
3. The shaft seal adopts high-quality mechanical seal, and the dynamic and static rings are made of cemented carbide, which is wear-resistant, leak-free and has a long service life.
4. Adopt advanced water conservancy model, which has the characteristics of high efficiency and good performance.
5. Unique structure. The lower side of the pump body is provided with water discharge holes, and the inlet and outlet flanges are provided with pressure tapping holes, which can ensure the normal use and maintenance of the pump.
6. The inlet of this series of horizontal pumps is horizontal, and the outlet is vertical upward structure, which is convenient for pipeline arrangement.
Structure:
Vertical inline pump:
The ISG vertical inline centrifugal pump is an excellent hydraulic model selected by our company's scientific and technical personnel and internal water pump experts. It adopts the performance parameters of the IS type centrifugal pump and is designed by ingenious combination on the basis of general vertical pumps.
At the same time, suitable hot water, high temperature, corrosive chemical pumps and oil pumps are derived from the ISG type according to the use temperature and medium.
Performance Parameters:
| Flow range: |
1.1-2000m3/h |
| Head range: |
5-153.6m |
| Power: |
0.18-160kw |
| Material: |
Cast iron,SS304,SS316,SS201,etc |
Features:
· The pump is a vertical structure, the inlet and outlet have the same caliber and are located on the same centerline,it can be installed in the pipeline like a valve.
·The impeller is directly installed on the extended shaft of the motor, with short axial size, compact and beautiful structure, small floor area and low construction investment. With a protective cover, it can be used outdoors.
·The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, so as to ensure the stable operation of the pump, low vibration and low noise.
· The shaft seal adopts a mechanical seal or a combination of mechanical seals, and uses imported titanium alloy seal rings, medium-sized high-temperature resistant mechanical seals and cemented carbide materials, and wear-resistant seals, which can effectively extend the service life.
· Convenient installation and maintenance, no need to dismantle the pipe road system, all the rotor parts can be drawn out by removing the nut of the pump joint base.
· The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline layout, and the series and parallel operation of the pump can be adopted according to the requirements of the use, that is, the flow and head.
Structure:
Application:
Company:
Shijiazhuang Chongmu Fluid Machine Co., Ltd is a modern pump company specializing in production, research and development, sales and service. We have been in the centrifugal pump industry for more than 20 years. We have a modern standard pump room and a processing workshop with a variety of advanced processing equipment. The whole process from casting to assembly is one-stop closed-loop production. The team of experienced production R&D engineers is professional and efficient. Choose us, professional team, professional equipment, trustworthy.
Chongmu Main products:
1.Slurry pumps
2.Gravel pumps
3.ZJQ submersible slurry pumps
4.Inline pumps
5.Multi-stage pumps
6.Split case pumps
7.Sewage pumps
8.Mixed flow pumps
9.Self priming pumps
10.Spare parts
Our Workshop:
FAQ:
1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: Hz
2.Are you the manufacturer or trading company?
We are real manufacturer for centrifugal pumps,and we have been in this industry for more than 20 years.
3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.
4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.
5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.
Audited Supplier 
){kind=link}